久久久免费视频播放/亚洲成人a√/农村少妇好紧水多视频/91精品国产福利

A, features,
1. The V type plunger pump, with unique design change swash plate Angle function, widely used in machine tools, machine tools, forging, plastic forming machine;
2. The special design, in the full pressure zone, low noise performance;
(3) by a variety of control mode integration, can make the system can save energy, miniaturization, low cost, etc;
4. Low power loss, reduce the oil temperature rise, the smaller tank is optional.

Second, model specifications

V15A1RBS–A24010X
1 2 3 4 5 6 7 8 9 10

1: axial variable piston pump
2: geometric displacementSee the specification sheet
3: control mode As shown in the table control way
4: regulating range 1: * ~ 140 bar.2: * ~ 175 bar.3: * ~ 210 bar
5: direction of rotation (from the axial) R: clockwise direction;L: counterclockwise
6: direction of pipe blank: on both sides of the gateway;B: the rear entrance (geometric displacement 50; seven without this specification)
7: axis type blank: flat key;S: spline (SAE J498b);

8: voltage type blank: no voltage (standard);A110: AC110V / 60 hz;A120: AC110V / 50 hz;
A220: AC220V/60Hz; A240:AC220V/50Hz; D12:DC 12V; D24:DC 24V
9:00 oil thread of: not attached to the flange;10: PT/RC (English);40: BSPP (metric system)
50: NPT (English);60: the SAE (English);70: M (metric system)
10: design code X: standard;The X1: the special low pressure machine tools;Z: idling pressure type

Three, specification table